The development hereby permitted shall be begun (as defined by Section 56 of the Town and Country Planning Act 1990) before the expiration of three years from the date of this permission. Reason: To comply with the requirements of Sections 91-93 of the Town and Country Planning Act 1990 (as amended).
The development shall be carried out in accordance with the details indicated in the following drawings/documents:- Site Location Plan received 6th October 2025 Area to be drilled photograph 6th October 2025 Pump and tank locations photographs received 20th October 2025 Borehole Info received 6th October 2025 Application Form received 6th October 2025 Reason : To define the plans/details to which this permission relates.
Any external lighting erected within the site shall meet the following requirements and be retained as such thereafter; i) Lights shall be fully shielded to angle the light downward; ii) Lights shall be no more than 500 lumens; iii) Lights shall have a colour temperature less than 2700K; iv) Lights shall be fitted with proximity sensors so they are switched off when not needed (dusk till-dawn sensors shall not be use); v) Lights shall be installed at the lowest possible height to achieve lighting levels required. Reason: To ensure that the general amenity of the area is retained, wildlife is protected and the development protects the dark skies of the National Park, having regard to policy SP4 of the adopted Yorkshire Dales Local Plan (2015-2030).
Within 6 months of the completion of the development hereby permitted either a bat box, or a bird box, shall have been installed within the application site and shall be retained as such thereafter. Reason: In the interests of wildlife enhancement in accordance with policy W2 of the adopted Yorkshire Dales Local Plan (2015-2030).
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.