T1 T2, T3 & T4 - Remove all branches no more than 35mm in diameter from ground level to crown approximately 5.5 to 7.5 metres high depending upon slope at ground level. Crown lift to give 1metre clearance above the roof and 500mm clearance from the side elevation of property known as Went Hus. T1 to T6 - Crown Lift branches overhanging the roof of property known as Went Hus to achieve 1metre clearance between the branch tips and the roof itself and 500mm from the branch tips and the side wall. No pruning wounds greater than 40mm in diameter to be generated as a result of the works.T5 and T6 - Fell.
Went Hus Great North Road Wentbridge Pontefract WF8 3JP
DecidedReference: 26/01040/TPOWakefield Metropolitan District Council
Last published check: 8 Oct 2026, 11:29. Check the council record for more recent changes.
Application timeline
Council milestones and published deadlines. A deadline passing does not confirm a decision.
T1 T2, T3 & T4 - Remove all branches no more than 35mm in diameter from ground level to crown approximately 5.5 to 7.5 metres high depending upon slope at ground level. Crown lift to give 1metre clearance above the roof and 500mm clearance from the side elevation of property known as Went Hus. T1 to T6 - Crown Lift branches overhanging the roof of property known as Went Hus to achieve 1metre clearance between the branch tips and the roof itself and 500mm from the branch tips and the side wall. No pruning wounds greater than 40mm in diameter to be generated as a result of the works.T5 and T6 - Fell.
Proposal details
Reference
26/01040/TPO
Alternative references
PP-15012317
Ward
Pontefract South
Parish
Wentbridge
Sign in to view all collected council fields and recorded changes.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.
