Understanding planning · 13 min read
Planning application documents: what to read first
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Council planning record
Fairlawns Maidstone Road Hadlow Tonbridge Kent TN11 0DJ
Fairlawns Maidstone Road Hadlow Tonbridge Kent TN11 0DJ
This record has no verified map location.
View council map1 x Sycamore (in poor condition but not completely dead) - Dismantle down to 8 feet, leaving the ivy on the lower stems to become part of the hedge. (1 x dead Sycamore - Dismantle down to 8 feet, leaving the Ivy on the lower stems to become part of the hedge. Remove the laurel and shrubs on the lawn side and clear the saplings from the under storey all of which have a stem diameter less than 7.5cm measured at 1.5 metres above natural ground level. Chip and remove all arising's, leaving a clean and tidy site. Grind the laurel and shrub stumps, on the lawn side, to approximately 6 inches below ground level and heap all arising's to allow for settlement).
Sign in to view all collected council fields and recorded changes.
Sign in to view collected detailsNo documents match this view.
Documents open on the council website. Browse council documents if a link has changed.
Council milestones and published deadlines. A deadline passing does not confirm a decision.
A published target or deadline. It does not confirm an outcome.
Council sourceA published target or deadline. It does not confirm an outcome.
Council sourceWe haven’t collected any decision conditions for this application.
Understanding planning · 13 min read
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understanding planning · 13 min read
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Understanding planning · 13 min read
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.