RefusedCouncil status: Listed Build - Prop Lawful Dev Refused
The proposed works are 1) installation of a battery storage system 2) installation of multi split heating / cooling system to the kitchen and dining room Battery storage It is proposed to install a floor mounted battery storage system within the garage, the batteries will be located on an external wall beneath the existing wall mounted solar inverter. Each battery capacity is 13.5 kwh and each battery measures 1,099 x 609 x 193 mm in size. The batteries will be capable of be charged from the existing solar PV array and from overnight off peak electricity from the grid. It is proposed to install up to 3 batteries. Multi split system installation The multi split heating system comprises 3 main components a) 2 x wall mounted venting units b) 1 x wall mounted compressor unit. It is proposed to wall mount 1 venting unit at high level in each of the dining room extension and the kitchen. The compressor unit is to be mounted low level on the external wall of the dining room. Black pipework will run along the external wall at low level and enter the rear lobby near floor level and run vertically in the corner where it will be discreetly boxed in. There will not be any visible pipework in the kitchen or dining room because the vent units connections are at the rear. The compressor is 804 x 298 x 252 mm in size.
The Old Vicarage 13 High Street Bidford-on-Avon Alcester B50 4BQ
The proposed works are 1) installation of a battery storage system 2) installation of multi split heating / cooling system to the kitchen and dining room Battery storage It is proposed to install a floor mounted battery storage system within the garage, the batteries will be located on an external wall beneath the existing wall mounted solar inverter. Each battery capacity is 13.5 kwh and each battery measures 1,099 x 609 x 193 mm in size. The batteries will be capable of be charged from the existing solar PV array and from overnight off peak electricity from the grid. It is proposed to install up to 3 batteries. Multi split system installation The multi split heating system comprises 3 main components a) 2 x wall mounted venting units b) 1 x wall mounted compressor unit. It is proposed to wall mount 1 venting unit at high level in each of the dining room extension and the kitchen. The compressor unit is to be mounted low level on the external wall of the dining room. Black pipework will run along the external wall at low level and enter the rear lobby near floor level and run vertically in the corner where it will be discreetly boxed in. There will not be any visible pipework in the kitchen or dining room because the vent units connections are at the rear. The compressor is 804 x 298 x 252 mm in size.
Reference
24/01824/LBP
Ward
Bidford East
Parish
Bidford-on-Avon
Sign in to view all collected council fields and recorded changes.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.