Under Section 96a of the Town and Country Planning Act 1990 (as amended), the amendments are acceptable as non- material amendments to the scheme approved under reference 21/01299/FUL. Proposed front and rear elevations – CCAC-DR-A-00-13-Rev P02 Proposed roof plans and side elevations – CCAC-DR-A-00-14-Rev P02 The non- material amendments as shown on the above drawings would permit the following amendments; 1. Replace the approved hipped roof with a gabled roof 2. Omit the front ‘false’ gable 3. Omit the windows to the rear and west elevations 4. Change the facing brick 5. Minor adjustments to the window sizes and positions The amendments form relatively minor elements of the overall scheme and do not materially alter the overall nature or appearance of the development or its impact upon it’s the character and appearance, those of the area, or neighbour amenity. Accordingly, condition 2 of planning permission 21/01299/FUL is hereby amended. This notice shall be appended to planning permission 21/01299/FUL and all other conditions attached thereto, remain in place and in force. Condition 2 The development hereby permitted shall be carried out in accordance with the following approved plans; - Location Plan - Existing Block Plan (Drawing number CACC-DR-A-00-06 Rev P01) - Proposed Block Plan (Drawing number CACC-DR-A-00-10 Rev P01) - Existing Floor Plan (Drawing number CACC-DR-A-00-03 Rev P02) - Overall Site Plan (Drawing number CACC-DR-A-00-01 Rev P01) - Existing Elevations (Drawing number CACC-DR-A-00-04 Rev P01) - Proposed Floor Plan (Drawing number CCAC-DR-A-00-12 Rev P01) - Proposed Roof Plan and Side Elevations CCAC-DR-A-00-14 Rev P02) - Proposed Front and Rear Elevations (Drawing number CCAC-DR-A-00-13 Rev P02) - Existing Roof Plan and Side Elevations (Drawing number CACC-DR-A-00-05 Rev 01) Reason: For the sake of clarity. I trust that the above advice is of use however should you have any further queries, please do not hesitate to contact me on the details shown at the top of this letter.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.