Discharge of condition C3 (external facing materials) pursuant to planning permission 25/01259/HHFUL No development other than groundworks and foundations shall take place unless and until details of all external facing materials to be used have been submitted to the Local Planning Authority and approved in writing. The development shall be carried out in accordance with the approved details. Reason: For the Local Planning Authority to ensure a satisfactory external appearance, in accordance with Policies LP16 and LP19 of the Peterborough Local Plan (2019) and Sections 12 and 16 of the National Planning Policy Framework (2024)(2025 as amended) and Section 72(1) of the Planning (Listed Buildings and Conservation Areas) Act 1990 (as amended). Approved Documents and Details: - Covering letter dated 11.03.2026 ‘Application for the approval of details reserved by Condition 3 of 25/01259/HHFUL’ - Email dated 13.04.2026 – Further details of stone and oak cladding. Assessment: The Conservation Officer was consulted on this application and raised an initial concern regarding the details provided. Further specific detail was requested regarding the proposed materials, and this was received. The proposed details for the oak cladding, stone, roofing, windows, doors, and rainwater goods would remain in keeping with the existing dwelling and wider conservation area. The materials would not cause unacceptably adverse impacts upon the character and appearance of the site or surrounding conservation area and would accord with policies LP16, LP19 of the Peterborough Local Plan (2019), Sections 12 and 16 of the National Planning Policy Framework (2024)(2025 as amended) and Section 72(1) of the Planning (Listed Buildings and Conservation Areas) Act 1990 (as amended). Conclusion: Subject to satisfactory implementation on site this condition is hereby discharged.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.