Condition 3 (Door and Window details) The condition states: - Prior to the insertion of any external doors and windows, cross section drawings at a scale no smaller than 1:2 and elevation drawings at a scale no smaller than 1:10 of all new windows and doors, including details of glazing, glazing bars, sills, lintels and finish shall be submitted to and agreed in writing by the Local Planning Authority. The works shall be carried out in accordance with the approved details and retained as such thereafter. Reason: In order to preserve the special architectural and historic character of the Heritage Asset in accordance with section 66(1) and 72(1) of the Planning (Listed Buildings and Conservation Areas) Act 1990 (as amended), Policy LP19 of the Peterborough Local Plan (2019) and Chapter 16 of the National Planning Policy Framework (2023) Approved documents: 2820_AC0201_D02 - External Door Design Intent Assessment The proposed door is considered to be of a positive character which is in keeping with the building. Further the construction of the door is of a traditional arrangement which will keep the significance of the building construction. It should be noted however that this discharge application only relates to this particular door and any other external doors and windows proposed to be replaced will need discharging separately. Conclusion The details submitted relating to condition 3 are acceptable to the Local Planning Authority and comply with the submission requirements of the condition. Condition 3 is hereby discharged, subject to development being undertaken in strict accordance with the approved details.
Related records
No related records were published in this section.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.