Council planning record

T1 Ash= Reduce the length of the branches on the road side only by 50% Reason: Tree has class 2 Ash Dieback, the pruning is to reduce the probability of harm through limb failure. T2 Maple= Re pollard the tree with final cuts being 400mm above the previous pollard cut. Reason: This is an old pollarded tree with extensive decay in the stem, the secondary growth is now at a high risk of failure. T3 Birch= Fell. Reason. The tree is in decline (for unknown reasons), its close and overhanging proximity to the allocated parking area puts its PoH at 1/40k T4 Ash= Reduce the length of the branches on the road side only by 50% Reason: Tree has class 1-2 Ash Dieback, the pruning is to reduce the probability of harm to acceptable levels.

Longwoods, Station Road, Hope, Hope Valley, S33 6RR

Decided: ACCEPTReference: NP/TCA/0924/1026Peak District National Park Authority

Application timeline

Council milestones and published deadlines. A deadline passing does not confirm a decision.

  1. Registered

    Published milestoneCouncil source
  2. Statutory expiry date

    Past published deadline

    A published target or deadline. It does not confirm an outcome.

    Council source

Application summary

Status
Decided: ACCEPT
Application type
Not published
Received
Not published
Validated
Not published
Determination deadline
25 Nov 2024
Local authority
Peak District National Park Authority

Application overview

T1 Ash= Reduce the length of the branches on the road side only by 50% Reason: Tree has class 2 Ash Dieback, the pruning is to reduce the probability of harm through limb failure. T2 Maple= Re pollard the tree with final cuts being 400mm above the previous pollard cut. Reason: This is an old pollarded tree with extensive decay in the stem, the secondary growth is now at a high risk of failure. T3 Birch= Fell. Reason. The tree is in decline (for unknown reasons), its close and overhanging proximity to the allocated parking area puts its PoH at 1/40k T4 Ash= Reduce the length of the branches on the road side only by 50% Reason: Tree has class 1-2 Ash Dieback, the pruning is to reduce the probability of harm to acceptable levels.

Proposal details

Reference
NP/TCA/0924/1026
Parish
Hope
Agent
Robert Booth Arboricultural consultant

Sign in to view all collected council fields and recorded changes.

Sign in to view collected details

Application location

Longwoods, Station Road, Hope, Hope Valley, S33 6RR

This record has no verified map location.

Documents 8 of 8

DocumentPublishedAction
ApplicationFormRedactedCouncil documentNot publishedView
QTRA Longwoods Station road 2024Council documentNot publishedView
QTRA Longwoods Station road 2024Council documentNot publishedView
QTRA Support document Sabina Gladestone 2024Council documentNot publishedView
Site plan Laneside Farm Hopevalley 2024Council documentNot publishedView
ApplicationFormRedactedCouncil documentNot publishedView
Tree Officer Approval 10-10-2024Council documentNot publishedView
Exolum 11-10-2024Council documentNot publishedView

Documents open on the council website. Browse council documents if a link has changed.

Decision & conditions

Decided: ACCEPT
Planning conditions

Conditions aren’t listed here. Read the council decision notice for the full decision and conditions.

Related records

Related records could not be loaded.

Understand this planning record

All planning guides
  • Understanding planning · 13 min read

    Planning application documents: what to read first

    Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.

  • Understanding planning · 13 min read

    Planning application statuses explained

    Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.

  • Understanding planning · 13 min read

    Planning permission drawings: how to read plans

    Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.