Understanding planning · 13 min read
Planning application documents: what to read first
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Application overview
New window to gable elevation, railings, ramp and hardstanding to rear.
Proposal details
- Reference
- 23/0122/CLD
- Ward
- Berwick Hills/Pallister
- Agent
- Moore
- UPRN
- 100110108101
Sign in to view all collected council fields and recorded changes.
Sign in to view collected detailsDocuments 7 of 7
| Document | Published | Action |
|---|---|---|
| Existing plans 01Drawing | 13 Mar 2023 | View |
| Proposed floor plans 02Drawing | 13 Mar 2023 | View |
| Proposed elevation plans 03Drawing | 13 Mar 2023 | View |
| Site plan 04Drawing | 13 Mar 2023 | View |
| Location PlanDrawing | 13 Mar 2023 | View |
| Application FormApplication Form | 13 Mar 2023 | View |
| Decision NoticeDecision | 14 Mar 2023 | View |
Documents open on the council website. Browse council documents if a link has changed.
Application timeline
Council milestones and published deadlines. A deadline passing does not confirm a decision.
Decision due date
Past published deadlineA published target or deadline. It does not confirm an outcome.
Council source
Decision & conditions
Decision NoticePlanning conditions
- INFORMATIVE NOTE: Conditional Compliance Part 1 Class A You are advised that the development would need to comply with the conditions as provided for in The Town and Country Planning (General Permitted Development) (England) Order 2015 (as amended) Schedule 2 Part 1 Class A ‘The enlargement, improvement or other alteration of a dwellinghouse’ Which details that development is permitted by Class A subject to the following conditions; (a) the materials used in any exterior work (other than materials used in the construction of a conservatory) must be of a similar appearance to those used in the construction of the exterior of the existing dwellinghouse; (b) any upper-floor window located in a wall or roof slope forming a side elevation of the dwellinghouse must be (i)obscure-glazed, and, (ii)non-opening unless the parts of the window which can be opened are more than 1.7 metres above the floor of the room in which the window is installed; and (c) where the enlarged part of the dwellinghouse has more than a single storey, or forms an upper storey on an existing enlargement of the original dwellinghouse, the roof pitch of the enlarged part must, so far as practicable, be the same as the roof pitch of the original dwellinghouse.
- The proposed works fall within the scope of the Town and Country Planning (General Permitted Development) (England) Order 2015 (as amended) and is not precluded by any other provisions and is therefore permitted development as it is within the scope of Schedule 2, Part 1, Class A of the Town and Country Planning (General Permitted Development) (England) Order 2015 (as amended) The development shall not be undertaken other than in complete accordance with the drawings received on 14 March 2023.
- INFORMATIVE NOTE: No deviance from submitted details Any change to the details submitted and considered, no matter how minor, may change whether the development is permitted and would nullify the Certificate of Lawfulness. Any changes would therefore need either another Certificate of Lawfulness to be submitted or a full planning application or prior approval application depending on the nature / extent of the change.
- You are advised that the development would need to comply with the conditions as provided for in The Town and Country Planning (General Permitted Development) (England) Order 2015 (as amended) Schedule 2 Part 1 Class F ‘Hard surfaces incidental to the enjoyment of a dwellinghouse’ which details that development is permitted by Class F subject to the following conditions; Where— (a)the hard surface would be situated on land between a wall forming the principal elevation of the dwellinghouse and a highway, and (b)the area of ground covered by the hard surface, or the area of hard surface replaced, would exceed 5 square metres, either the hard surface is made of porous materials, or provision is made to direct run-off water from the hard surface to a permeable or porous area or surface within the curtilage of the dwellinghouse. Class G – Chimneys, flues etc on a dwellinghouse No Conditional requirements
