Council planning record

(APPLICATION PROCESSED BY DFI, PLEASE REFER TO THE DFI PORTAL FOR FURTHER INFORMATION)Application under Section 54 of the Planning Act (Northern Ireland) 2011 to develop land without compliance with condition 25 of the Planning Approval Reference: LA09/2016/0232/F for an 11 turbine wind farm and associated infrastructure. Condition 25 states that the height of the turbines to the tip of the blades shall not exceed 149.9m, their hub height shall not exceed 100m and their rotor diameter shall not exceed 99.8m. This application seeks to vary condition 25 to state that the height of the turbines to the tip of the blades shall not exceed 149.9m, their hub height shall not exceed 100m and their rotor diameter shall not exceed 117m. Minor movements to two of the turbines and associated infrastructure within their micrositing areas are also proposed.

Lands approximately 3km West of Swatragh Accessed Off The Corlacky Road In The Townlands of Corlacky Knockoneill Half Gayne and Tirkane Co.Derry/Londonderry

Permission GrantedReference: LA09/2021/1155/FMid Ulster District Council

Application location

Lands approximately 3km West of Swatragh Accessed Off The Corlacky Road In The Townlands of Corlacky Knockoneill Half Gayne and Tirkane Co.Derry/Londonderry

This record has no verified map location.

View council map

Application summary

Status
Permission Granted
Application type
Full
Received
6 Aug 2021
Validated
6 Aug 2021
Determination deadline
Not published
Local authority
Mid Ulster District Council

Application overview

(APPLICATION PROCESSED BY DFI, PLEASE REFER TO THE DFI PORTAL FOR FURTHER INFORMATION)Application under Section 54 of the Planning Act (Northern Ireland) 2011 to develop land without compliance with condition 25 of the Planning Approval Reference: LA09/2016/0232/F for an 11 turbine wind farm and associated infrastructure. Condition 25 states that the height of the turbines to the tip of the blades shall not exceed 149.9m, their hub height shall not exceed 100m and their rotor diameter shall not exceed 99.8m. This application seeks to vary condition 25 to state that the height of the turbines to the tip of the blades shall not exceed 149.9m, their hub height shall not exceed 100m and their rotor diameter shall not exceed 117m. Minor movements to two of the turbines and associated infrastructure within their micrositing areas are also proposed.

Proposal details

Reference
LA09/2021/1155/F
Ward
Swatragh
Parish
Carntogher

Sign in to view all collected council fields and recorded changes.

Sign in to view collected details

Documents 0 of 0

No documents match this view.

Documents open on the council website. Browse council documents if a link has changed.

Application timeline

Council milestones and published deadlines. A deadline passing does not confirm a decision.

  1. Application Received Date

    Published milestoneCouncil source
  2. Application Validated Date

    Published milestoneCouncil source
  3. Decision Issued Date

    Published milestoneCouncil source
  4. Permission Expiry Date

    Published deadline

    A published target or deadline. It does not confirm an outcome.

    Council source

Decision & conditions

Permission Granted
Planning conditions

Conditions aren’t listed here. Read the council decision notice for the full decision and conditions.

Related records

Understand this planning record

All planning guides
  • Understanding planning · 13 min read

    Planning application documents: what to read first

    Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.

  • Understanding planning · 13 min read

    Planning application statuses explained

    Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.

  • Understanding planning · 13 min read

    Planning permission drawings: how to read plans

    Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.