This proposal CONSTITUTES DEVELOPMENT within the meaning of Section 55 of the Town and Country Planning Act 1990, but by virtue of Article 3 and Schedule 2 of the Town and Country (General Permitted Development) (England) Order 2015 and any subsequent legislative amendments is of a class which is described as PERMITTED DEVELOPMENT and therefore planning permission IS NOT REQUIRED subject to the following conditions: (a) the materials used in any exterior work (other than materials used in the construction of a conservatory) shall be of a similar appearance to those used in the construction of the exterior of the existing dwellinghouse; (b) any upper-floor window located in a wall or roof slope forming a side elevation of the dwellinghouse shall be: (i) obscure-glazed, and (ii) non-opening unless the parts of the window which can be opened are more than 1.7 metres above the floor of the room in which the window is installed; and (c) where the enlarged part of the dwellinghouse has more than one storey, the roof pitch of the enlarged part shall, so far as practicable, be the same as the roof pitch of the original dwellinghouse.
The development hereby permitted shall be carried out in accordance with the following approved plans and documents, where applicable. Received 13 August 2026: - Application Form - P.M.000 - Location Plan - P.M.100 - Existing Site Plan and 3D Views - P.M.200 - Existing Ground and First Floor Plans - P.M.201 - Existing Roof Plan - P.M.300 - Existing Elevations - P.M.400 - Rev B - Proposed Site Plan and 3D Views - P.M.500 - Proposed Ground and First Floor Plans - P.M.501 - Rev B - Proposed Roof Plan - P.M.600 - Rev B - Proposed Elevations REASON: To accord with the terms of the application, for the avoidance of doubt and in the interests of proper planning.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.