Council planning record

Ailanthus altissima tree of heaven (T1) Fell to ground level, with stump treatment to prevent regrowth.Identification. Single mature specimen, marked T1 on the sketch plan at Appendix A. Trunk diameter 392mm measured at 1.5m above ground level (girth 1230mm). Approximate height 12?15 metres. Located in the north-eastern corner of the rear garden of 16 Trinity Gardens, approximately 5 metres from the rear elevation of the dwelling, with the trunk running at an angle along the eastern boundary wall. The adjoining properties to the east are owned by Trinity Homes and are not individually numbered; the land to the north is owned by the London Borough of Lambeth.1. Felling. Fell to ground level by section dismantle, in accordance with BS 3998:2010.2. Stump treatment. Treat the cut stump with a stem-delivered systemic herbicide plug (Ecoplug Max or equivalent). Application to follow felling immediately, and in any event within 48 hours. The product is applied at the manufacturer's rate for the measured stump diameter. The purpose is to kill the root system and prevent clonal suckering. There is no soil application, no foliar spray and no broadcast treatment anywhere on the site. The applicator will hold the relevant certificate of competence.3. Disposal. All arisings to be removed from site by a registered waste carrier to a permitted facility. No material will be chipped, spread, composted or retained on site.4. Stump. The stump will be left in situ following treatment. No stump grinding is proposed at this stage. Any grinding would follow after at least one full growing season, once the root system is confirmed dead.5. Reasons. Not required for a conservation area notice, but provided for completeness: Ailanthus altissima is a species of special concern under retained EU Regulation 1143/2014, enforced through the Invasive Alien Species (Enforcement and Permitting) Order 2019, listed 15 August 2019 and classified as not widely spread in England and Wales.

16 Trinity Gardens London SW9 8DP

Awaiting decisionReference: 26/02883/TCALondon Borough of Lambeth

Last published check: 13 Oct 2026, 00:15. Check the council record for more recent changes.

Application timeline

Council milestones and published deadlines. A deadline passing does not confirm a decision.

  1. Application Received Date

    Published milestoneCouncil source
  2. Application Validated Date

    Published milestoneCouncil source

Application summary

Status
Awaiting decision
Application type
Approval for works to trees in CA
Received
5 Oct 2026
Validated
5 Oct 2026
Determination deadline
Not published
Local authority
London Borough of Lambeth

Application overview

Ailanthus altissima tree of heaven (T1) Fell to ground level, with stump treatment to prevent regrowth.Identification. Single mature specimen, marked T1 on the sketch plan at Appendix A. Trunk diameter 392mm measured at 1.5m above ground level (girth 1230mm). Approximate height 12?15 metres. Located in the north-eastern corner of the rear garden of 16 Trinity Gardens, approximately 5 metres from the rear elevation of the dwelling, with the trunk running at an angle along the eastern boundary wall. The adjoining properties to the east are owned by Trinity Homes and are not individually numbered; the land to the north is owned by the London Borough of Lambeth.1. Felling. Fell to ground level by section dismantle, in accordance with BS 3998:2010.2. Stump treatment. Treat the cut stump with a stem-delivered systemic herbicide plug (Ecoplug Max or equivalent). Application to follow felling immediately, and in any event within 48 hours. The product is applied at the manufacturer's rate for the measured stump diameter. The purpose is to kill the root system and prevent clonal suckering. There is no soil application, no foliar spray and no broadcast treatment anywhere on the site. The applicator will hold the relevant certificate of competence.3. Disposal. All arisings to be removed from site by a registered waste carrier to a permitted facility. No material will be chipped, spread, composted or retained on site.4. Stump. The stump will be left in situ following treatment. No stump grinding is proposed at this stage. Any grinding would follow after at least one full growing season, once the root system is confirmed dead.5. Reasons. Not required for a conservation area notice, but provided for completeness: Ailanthus altissima is a species of special concern under retained EU Regulation 1143/2014, enforced through the Invasive Alien Species (Enforcement and Permitting) Order 2019, listed 15 August 2019 and classified as not widely spread in England and Wales.

Proposal details

Reference
26/02883/TCA
Ward
Brixton Acre Lane

Sign in to view all collected council fields and recorded changes.

Sign in to view collected details

Application location

16 Trinity Gardens London SW9 8DP

This record has no verified map location.

View council map

Documents 3 of 3

DocumentPublishedAction
STATEMENT OF REASONS FOR WORKSupporting Docs · PDF12 Oct 2026View
ADDITIONAL PLANSApplication Form · PDF5 Oct 2026View
SKETCH PLANPlans · PDF5 Oct 2026View

Documents open on the council website. Browse council documents if a link has changed.

Decision & conditions

Decision not yet published
Planning conditions

We haven’t collected any decision conditions for this application.

Related records

Understand this planning record

All planning guides
  • Understanding planning · 13 min read

    Planning application documents: what to read first

    Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.

  • Understanding planning · 13 min read

    Planning application statuses explained

    Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.

  • Understanding planning · 13 min read

    Planning permission drawings: how to read plans

    Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.