Section 73 Application (Minor Material Amendment) to vary Condition 2 (Approved Plans) of Planning Permission P2024/2600/FUL dated 04/12/2024 for ‘erection of a single storey rear extension at lower ground floor level and the installation of six roof lights to the main roof with associated alterations’. The amendments relate to the design and fenestration arrangement of the lower ground floor rear extension.
13 Pleshey Road, London, N7 0RA
FINAL DECISIONReference: P2026/2020/S73London Borough of Islington
Last published check: 28 Sept 2026, 17:11. Check the council record for more recent changes.
Application location
13 Pleshey Road, London, N7 0RA
This record has no verified map location.
Application summary
Status
FINAL DECISION
Application type
Removal/Variation of Condition (Section 73)
Received
30 Jul 2026
Validated
4 Aug 2026
Determination deadline
28 Sept 2026
Local authority
London Borough of Islington
Application overview
Section 73 Application (Minor Material Amendment) to vary Condition 2 (Approved Plans) of Planning Permission P2024/2600/FUL dated 04/12/2024 for ‘erection of a single storey rear extension at lower ground floor level and the installation of six roof lights to the main roof with associated alterations’. The amendments relate to the design and fenestration arrangement of the lower ground floor rear extension.
Proposal details
Reference
P2026/2020/S73
Alternative references
PP-15124925
Ward
Tufnell Park
UPRN
5300074635
Sign in to view all collected council fields and recorded changes.
S73 - CONSENT LIMITED TO THAT OF ORIGINAL PERMISSION: The development hereby permitted shall be begun not later than the expiration of 04/12/2027. REASON: To ensure the commencement timescale for the development is not extended beyond that of the original planning permission granted on 04/12/2024 LBI ref: P2024/2600/FUL. Furthermore, to comply with the provisions of Section 91(1)(a) of the Town and Country Planning Act 1990 as amended by the Planning and Compulsory Purchase Act 2004 (Chapter 5).
DRAWING AND DOCUMENT NUMBERS: The development hereby approved shall be carried out in accordance with the following approved plans: PL.01.001 Location Plan; PL.01.200 Rev P2 Proposed Floor Plans & Elevations; Sustainable Design and Construction Statement [Fairway Building Consultancy] REASON: To comply with Section 70(1)(a) of the Town and Country Act 1990 as amended and the Reason for Grant and also for the avoidance of doubt and in the interest of proper planning.
MATERIALS (COMPLIANCE): The development shall be constructed in accordance with the schedule of materials noted on the approved plans and within the Design and Access Statement. The development shall be carried out strictly in accordance with the details so approved and shall be maintained as such thereafter. REASON: In the interest of securing sustainable development and to ensure that the resulting appearance and construction of the development is of a high standard.
FLAT ROOF NOT USED AS AMENITY SPACE (COMPLIANCE): The flat roof of the single-storey rear extension hereby approved (as shown on plan no. PL.01.200) shall not be used as an amenity or sitting out space of any kind whatsoever and shall not be used other than for essential maintenance or repair, or escape in case of emergency. REASON: To prevent the undue overlooking of neighbouring habitable room windows.
CONSERVATION ROOFLIGHTS (COMPLIANCE): The rooflights shall be 'conservation grade rooflights' in metal painted black to sit flush with the roof covering and shall be maintained as such thereafter, unless otherwise agreed in writing by the Local Planning Authority. REASON: In order to safeguard the special architectural or historic interest of the heritage asset.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.