3 YEAR CONSENT PERIOD: The development hereby permitted shall be begun not later than the expiration of three years from the date of this permission. REASON: To comply with the provisions of Section 91(1)(a) of the Town and Country Planning Act 1990 as amended by the Planning and Compulsory Purchase Act 2004 (Chapter 5).
DRAWING AND DOCUMENT NUMBERS: The development hereby approved shall be carried out in accordance with the following approved plans: P(20)M-101 (Rev. B) – Location & Block Plans, P(20)M-201 (Rev. E) – Existing & Proposed Drawings, Planning Support Note prepared by Seb & Fin Architects Ltd (dated 26/05/2026), Sustainable Design & Construction Statement prepared by Seb & Fin Architects Ltd (dated 26/05/2026) REASON: To comply with Section 70(1)(a) of the Town and Country Act 1990 as amended and the Reason for Grant and also for the avoidance of doubt and in the interest of proper planning.
MATERIALS (COMPLIANCE): The development shall be constructed in accordance with the schedule of materials noted on the plans and within the Planning Support Note. The development shall be carried out strictly in accordance with the details so approved and shall be maintained as such thereafter. REASON: In the interest of securing sustainable development and to ensure that the resulting appearance and construction of the development is of a high standard.
FUEL (COMPLIANCE): The proposed development shall only use Authorised/Certified Fuels for England listed on DEFRA’s website under the Clean Air Act 1993. REASON: To ensure that the proposed development would not cause harm to air quality.
INFORMATIVE: The applicant is advised to visit the London Wood Burning Project website for further information and guidance on responsible wood burning practices and measures to minimise impacts on local air quality. The website provides advice on fuel selection, stove operation, and ways to reduce smoke and particulate emissions.
INFORMATIVE: The applicant is advised that this planning permission does not remove the need to obtain any necessary approvals under the Building Regulations. Particular regard should be given to fire safety requirements relating to the installation of the flue and stove. The applicant is therefore reminded to contact the Council’s Building Control team prior to commencing the works to ensure that all relevant statutory requirements are met.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.