TPO/2001/072 - T2 x1 Tulip Tree (Marked T005 on map) - Remove deadwood over 35mm, T3 x1 Beech (Marked T026 on map)- Decompact and feed using a Vogt Machine. TPO/2001/107 - W4 x2 Ash & x1 Dead/dying Hawthorn (Marked G010 on map) Fell, W4 x1 Lime (Marked T281 on Map) - Fell, W4 x1 Maple, x2 Lime, x1 Maple (Marked T296 & T302 & T305 & T308 on map) Remove deadwood over 35mm, W5 x2 Horse Chestnut Trees (Marked T201 & T202 on map) - Remove dead top, G2 x1 Robinia (Marked T216 on map) - Reduce height by 4m. Crown lift low canopy to 5m above ground level and Remove deadwood over 35mm. TPO/2002/071 - T1 x1 Beech (Marked T069 on map) - Reduce lowest limb on west side by 4m to side branches adjacent kerb edge. Remove deadwood over 35mm. TPO/2002/127 x1 Lime - (Marked T200 on map) - Reduce height by 10m to approximately 10m. Reason for all: General maintenance and health & safety works
TPO/2001/072 - T2 x1 Tulip Tree (Marked T005 on map) - Remove deadwood over 35mm, T3 x1 Beech (Marked T026 on map)- Decompact and feed using a Vogt Machine. TPO/2001/107 - W4 x2 Ash & x1 Dead/dying Hawthorn (Marked G010 on map) Fell, W4 x1 Lime (Marked T281 on Map) - Fell, W4 x1 Maple, x2 Lime, x1 Maple (Marked T296 & T302 & T305 & T308 on map) Remove deadwood over 35mm, W5 x2 Horse Chestnut Trees (Marked T201 & T202 on map) - Remove dead top, G2 x1 Robinia (Marked T216 on map) - Reduce height by 4m. Crown lift low canopy to 5m above ground level and Remove deadwood over 35mm. TPO/2002/071 - T1 x1 Beech (Marked T069 on map) - Reduce lowest limb on west side by 4m to side branches adjacent kerb edge. Remove deadwood over 35mm. TPO/2002/127 x1 Lime - (Marked T200 on map) - Reduce height by 10m to approximately 10m. Reason for all: General maintenance and health & safety works
Proposal details
Reference
26/05057/TPO
Alternative references
PP-14775292
Sign in to view all collected council fields and recorded changes.
Understand planning application documents, officer reports and decision notices. Use a reading checklist, document table and worked example to inspect a case.
Understand pending consideration, approved, refused and withdrawn planning applications. Compare status labels and find the documents explaining each outcome.
Read planning drawings, floor plans, elevations and sections. Use labelled diagrams, a drawing comparison table and revision checks to understand a proposal.
