Application for tree works T1 - Prune tree's canopy to attain approximately 2m ground clearance at western site boundary and 2.5m ground clearance at CEZ edge by: - Removing/shortening as appropriate, selected tertiary branches no greater than approximately 65mm diameter; and - Reducing lowest remaining laterals arising to east at approximately 2.5m height by up to 0.5m length to lessen end weight and allow branches to rise with alleviated weight, thereby increasing ground clearance to canopy edge. T2 - 1. Advise tree owner(s) to instruct detailed aerial assessment of branch wound (see Comments) as soon as practicable, and provide results to a Tree Consultant. 2. Tree owner(s) tree consultant to re-evaluate risk of failure of tree following provision of results of aerial inspection. 3. Prune tree's canopy to attain approximately 2.5-3m ground clearance by: - Removing three descending attenuated laterals arising off primary branch to east of approximately 75mm, 80mm and 100mm respectively; and - Removing/reducing any further low tertiary branches up to 65mm diameter where applicable.

18 Oak Tree Drive Barrow BB7 9JZ